Chemtrol # 108 Abrasive Compound

Chemtrol # 108 Abrasive Compound

Stock No.: Chemtrol # 108

$96.00

Chemtrol 108 is a fine, long-lasting, clean cutting, white aluminum oxide abrasive compound for normal burr and micro-inch improvement. Typically used with ceramic, natural, or soft metallic medias.

Packaging

50 lb pail
Classification

Powder
Appearance

Off White Gritty Powder
Application

Abrasive Deburring, RMS Improvement
Type of Compound

Abrasive
Material Compatibility

Cold Rolled Steel, Hardened Steel, Stainless Steel, Copper, Gold, Silver
PH 1% Solution

9.3

Key Benefits
  • Produces clean, smooth finishes on all metal parts.
  • Low RMS results; <5 RA based on incoming surface condition >
  • Prevents corrosion of ferrous parts.
  • Suspends abrasive in mass for uniform results.
  • Use ¾ to 1 pound per gallon of water with ceramic medias.
  • Use 2 pounds per gallon for self tumble and soft metallic medias.

Waste Disposal: Biodegradable. Effluent may require settling of solids to meet local codes prior to discharge. Does not contain phosphates, heavy metals, or other priority pollutants. ALWAYS CHECK WITH YOU LOCAL PWA FOR MINIMUM DISCHARGE LIMITS

Industrial Applications Only: Chemtrol 108 is an industrial strength product. Avoid contact with skin, eyes, and clothing. In case of contact, wash affected area with water. Flush eyes with water for at least 15 minutes.If irritation persists, seek prompt medical attention.

The Chemtrol line of chemistry is expertly engineered and formulated for mass finishing applications. From vibratory finishing, cleaning, heat treatment, corrosion control, and facility maintenance,  our chemistries are value-added process parameters you can rely on.

Stock No.: Chemtrol # 108 Categories: ,